Strip Lamps with Touch Sensor
Reference:
Strip Lamps with Touch Sensor
Features / Specifications
|
Fitting InstructionsBy using supplied screws, pop the pre-fitted screw caps by pushing from the back of the lamp. Fit using two exposed fixing points and then reinstall the screw caps. |
|
|
Technical Drawings
|
Please contact our Customer Service team for all sales enquiries.Phone: 1800 815 000 |
|
| Function | Interior Strip Lamp with On/Off Touch Switch |
 |
|
| Part No. | |
| 40260MCU | 12 Volt, Single blister, Black Finish |
| 40260SMCU | 12 Volt, Single blister, Silver Finish |
| . | |
| Lumen | Raw - 300lm, Effective - 237lm |
| LED Qty | 10 SMD |
| Cable | 20cm |
| Draw | |
| @13.8V | 0.475A |
| Function | Interior Strip Lamp with On/Off Touch Switch |
 |
|
| Part No. | |
| 40410MCU | 12 Volt, Single blister, Black Finish |
| 40410SMCU | 12 Volt, Single blister, Silver Finish |
| . | |
| Lumen | Raw - 600lm, Effective - 474lm |
| LED Qty | 20 SMD |
| Cable | 20cm |
| Draw | |
| @13.8V | 0.92A |
| Function | Interior Strip Lamp with On/Off Touch Switch |
 |
|
| Part No. | |
| 40770MCU | 12 Volt, Single blister, Black Finish |
| . | |
| . | |
| Lumen | Raw - 1200lm, Effective - 948lm |
| LED Qty | 40 SMD |
| Cable | 20cm |
| Draw | |
| @13.8V | 1.40A |
Strip Lamps with Touch Sensor
4 other products in the same category:
Features / Specifications
|
Fitting InstructionsBy using supplied screws, pop the pre-fitted screw caps by pushing from the back of the lamp. Fit using two exposed fixing points and then reinstall the screw caps. |
|
|
Technical Drawings
|
Please contact our Customer Service team for all sales enquiries.Phone: 1800 815 000 |
|