5025 Series

5025 Series

Reference: 5025 Series

Features / Specifications

  • Non fastener fitting design
  • Low profile and compact
  • Saves Time on Installation
  • ADR approved
  • IP67 100% Water proof
  • Voltage Range 12-24 Volt
  • 5 Year Warranty
  • 50mm x 25mm x 21mm

Fitting Instructions

Drill a 10mm hole for the serrated plug. Pull the sheathed cable through the hole. 
Remove the protective film from the 3M tape. Push the serrated plug into the hole. 
Line up the lamp and press firmly. The lamp is held securely with the plug serrations and high quality 3M tape. Please refer to ADR 13/00 for mounting instructions.

Download Data Sheet

Technical Drawings

Please contact our Customer Service team for all sales enquiries.

Phone: 1800 815 000
Email: [email protected]

Part
Function Rear end outline marker
5025RM_1.gif
Part No. 
Black Bkt
5025RM2 Blister Twin
5025RMB Single Poly Bag
LED Qty 2
Cable 20cm
Draw @13.8V @28V
0.029A 0.029A
Approvals  Function Category CRN
ADR Rear End 49/00 47202
CTA Rear End 49/00 CTA-047202
Function Side marker/Side Direction/Front Outline
5025AM.gif
Part No. 
Black Bkt
5025AM2 Blister Twin
5025AMB Single Poly Bag
LED Qty 3
Cable 20cm
Draw @13.8V @28V
0.029A 0.029A
Approvals  Function Category CRN
ADR Side Marker 74/00 47214
ADR Side Direction 6/00/5 47215
ADR Front End 49/00 47218
CTA Side Direction 6/00 Cat5 CTA-060133
Function Side marker
5025ARM.gif
Part No. 
Black Bkt
5025ARM2 Blister Twin
5025ARMB Single Poly Bag
LED Qty 2
Cable 20cm
Draw @13.8V @28V
0.029A 0.029A
Approvals  Function Category CRN
ADR Side Marker 45/01  47212
CTA Side Marker 45/01 CTA-047212
Function Front end outline marker
5025WM.gif
Part No. 
Black Bkt
5025WM Blister Twin
5025WMB Single Poly Bag
LED Qty 2
Cable 20cm
Draw @13.8V @28V
0.029A 0.029A
Approvals  Function Category CRN
ADR Front End 49/00 47203
CTA Front End 49/00 CTA-047203
5025 Series